The Oil Capacity for the John Deere 102 Mower

The Oil Capacity for the John Deere 102 Mower

The John Deere 102 is part of the 100 series of riding lawn mowers acceptable for use by homeowners with medium- to large-size lawns. Ownership of a John Deere 102 mower involves routine maintenance so the mower will probably continue to function as designed by the manufacturer. Included in the maintenance is altering the oil so the motor will remain properly lubricated. Knowing the oil ability is essential, because an excessive amount of oil will damage the motor.

Importance of Petroleum Capacity

The ideal quantity of oil in a John Deere 102 mower will supply just the perfect quantity of lubrication to allow the motor to function as designed. An excessive amount of oil or inadequate oil will have a negative influence on the internal areas of the mower engine. Too little oil will prevent proper lubrication of internal parts, leading to excess wear and tear. Too much oil will result in excessive air bubbles and also have a similar impact on the parts from a lack of proper lubrication. Over filling the mower with oil will also result in the oil burning in the cylinders as well as also the buildup of excessive carbon deposits.

Recommended Capacity

The recommended capacity is the quantity of oil that the manufacturer specifies so the motor operates efficiently. The John Deere 102 mower includes a recommended oil capacity of 1.5 quarts. The manufacturer also recommends using SAE oil such as 5W-30, 10W-30 or even 15W-40, based on air temperature where you’ll use the mower. All three components are acceptable for use between zero and 80 degrees Fahrenheit, with 10W-30 and 15W-40 providing protection at higher temperatures up to 105 and 122 degrees F, respectively.

Checking the Oil Level

The quantity of oil needed is determined in two ways. First, to add oil between changes, the dipstick will dictate the proper amount to include. Before checking the oil, then begin the John Deere mower and let it run for many minutes to circulate oil through the motor. Get the dipstick by unscrewing the oil fill cap in the oil fill tube. Wipe off the dipstick, and then reinsert it from the oil fill tube. Pull the dipstick out again to find an accurate oil level reading.

Adding Oil

After checking the oil level, pour oil into the oil fill tube to bring the amount up to the full mark on the dipstick. Using a funnel inserted into the oil fill tube will assist in preventing unnecessary oil spills. Observing a comprehensive oil change, add the recommended amount of 1.5 quarts of oil to the mower. Running the motor for a few minutes will help circulate the oil and supply an accurate reading on the oil dipstick.

See related